Resource Library

Altair Offers Flexibility and Enhancement for Casting Process Design and Optimization

The goal of the project outlined in this paper is to get the optimal gating system (size and position of ingate) to help avoid porosity and other common defects in the produced parts, achieving the final design to begin casting the component.

Brochures, Customer Stories

Implementing CAE into the Design Process for Composite Tennis Racquets at Wilson Sporting Goods

Wilson Labs, the innovation hub at Wilson Sporting Goods, leveraged OptiStruct and Altair ProductDesign for composites finite element analysis to reduce design cycle time and enhance product value.

Customer Stories

Hyundai Mobis Automotive Group Improves the EMC Analysis Process from 2D to 3D Using FEKO for Shielding Effectiveness Simulation

To analyze and optimize the shielding effectiveness of the housing in an Around View Monitor (AVM) while meeting EMC requirements, Hyundai MOBIS automotive group improves the Electromagnetic Compatibility Analysis (EMC) process from 2D to 3D using...

Customer Stories

Top Use Cases: FEMFAT

Presentation introducing a few of the top use cases for the durability analysis software, FEMFAT.

Customer Stories

Airbus Helicopters

Airbus Helicopters Weight & Balance (W&B) team is tasked with collecting and analyzing data to forecast the weight of a product during the conceptualization phase. Collecting useful and up-to-date data in a standardized way from this wide group of...

Customer Stories

Application of FEKO in EM Protection Design for Electromagnetic Effects of Civil Aircraft

In the limited space of a plane, a lot of radio equipment, especially antennas are installed, leading to concerns about antenna pattern distortion caused by the plane body and inter-antenna isolation.

COMAC, Shanghai Aircraft Design and Research Institute continues selecting FEKO to improve the

Customer Stories

Top Use Cases: Total Materia

Presentation introducing a few of the top use cases for the material management software, Total Materia.

Customer Stories

Top Use Cases: Virfac

Presentation introducing a few of the top use cases for the welding simulation software, Virfac.

Customer Stories

Top Use Cases: StressCheck

Presentation introducing a few of the top use cases for the structural analysis software, StressCheck.

Customer Stories

Top Use Cases: NovaFlow&Solid

Presentation introducing a few of the top use cases for the casting simulation software, NovaFlow&Solid.

Customer Stories

Top Use Cases: AFDEX

Presentation introducing a few of the top use cases for the forging and metal forming software, AFDEX.

Customer Stories

Top Use Cases: Charge

Presentation introducing a few of the top use cases for the electrostatic simulation software, Charge.

Customer Stories

Top Use Cases: Design Profit

Presentation introducing a few of the top use cases for the manufacturing cost analysis software, Design Profit.

Customer Stories

Top Use Cases: LOGEsoft and LOGEengine

Presentation introducing a few of the top use cases for the CFD analysis software, LOGEsoft and LOGEengine.

Customer Stories

Top Use Cases: CONVERSE

Presentation introducing a few of the top use cases for the composites software, CONVERSE.

Customer Stories

Top Use Cases: KTex Family

Presentation introducing a few of the top use cases for the composites software, KTex Family.

Customer Stories

Top Use Cases: LAP and CoDA

Presentation introducing a few of the top use cases for the composites software, LAP and CoDA.

Customer Stories

Top Use Cases: nanoFluidX

Presentation introducing a few of the top use cases for the CFD software, nanoFluidX.

Customer Stories

Top Use Cases: Maple and MapleSim

Presentation introducing a few of the top use cases for the mathematics and system modeling software, Maple and MapleSim.

Customer Stories

Top Use Cases: MADYMO

Presentation introducing a few of the top use cases for the crash and safety software, MADYMO.

Customer Stories

Top Use Cases: AlphaCell

Presentation introducing a few of the top use cases for the NVH software, AlphaCell.

Customer Stories

Top Use Cases: DSHplus

Presentation introducing a few of the top use cases for the systems simulation software, DSHplus.

Customer Stories

Top Use Cases: nCode DesignLife

Presentation introducing a few of the top use cases for the durability software, nCode DesignLife.

Customer Stories

Top Use Cases: CADdoctor

Presentation introducing a few of the top use cases for the geometry cleaning software, CADdoctor.

Customer Stories

CONVERSE for Consumer Goods

Use case showing how to apply CONVERSE by PART Engineering to bridge the gap between injection molding simulation and mechanical simulation.

Customer Stories

Top Use Cases: ESAComp

Presentation introducing a few of the top use cases for the composites software, ESAComp.

Customer Stories

Ford Battery Group Adopts Radioss Cut Methodology

In order to improve the simulation and accuracy of a high fidelity battery CAE model. Ford has turned to the cut methodology available in Radioss.

Customer Stories

RUAG Space Streamlines Composite Analysis with Improved Data Workflow

RUAG Space combines the power of the Altair HyperWorks Suite with the advanced composite failure analysis methods from ESAComp to improve their efficiency and composite modeling process.

Customer Stories

VTT Optimises Industrial Valve Block for Additive Manufacturing

Reprint of the article published on Metal AM - vol. 2 no. 1 Spring 2016

Customer Stories

Thales Alenia Space

Companies from across a wide range of industries are attempting to find the potential impact that additive manufacturing (AM) could have on design and manufacturing processes. During its own efforts to explore AM and its potential for space satell...

Customer Stories

Advanced Composite Material Calculations at eStress Using HyperWorks, LAP and CoDA

eStress' needed to develop a practical and generalized approach to assess the behavior of curved composite beams under corner unfolding loading for design sizing. This process shows how HyperWorks, LAP and CoDA worked together to achieve this.

Customer Stories

Bremar Automotion uses Altair Radioss to Design & Certify FIA Motorsport Roll Cages

“The Altair product is it for us in terms of simulation. That’s all we use. It’s great to be able to show such good correlation between the simulations and physical testing, and to have confidence in not only our approach, but also the Altair prod...

Customer Stories

Materialise Slicing Technology Enables Toyota’s Lightweight Car Seat

Toyota Motor Corporation and Toyota Central R&D Labs Inc. wanted to produce a lightweight car seat prototype with a minimal volume and an optimal heat capacity. To assist them in creating the complex design, Toyota contacted Materialise’s engineer...

Customer Stories

Materialise 3-matic Makes Topology Optimization More Attractive

See how 3-matic can transform scanned measurements to CAD files and develop volume meshes for FEM analysis.

Customer Stories

VTT Presents an Organic, Lightweight Hydraulic Valve

The VTT Technical Research Centre of Finland, the largest multidisciplinary research organization in Northern Europe, decided to explore the possibilities of 3D Printing to create the ideal hydraulic valve—lighter, with a better fluid flow and wit...

Customer Stories

Lightweight Structures Support Scherf Design to Reach New Heights

Scherf Design; an innovative design company, created a 3D printed, metal high heel shoe model that was both highly distinctive and wearable with the help of Materialise 3-matic software.

Customer Stories

adidas Futurecraft: The Ultimate 3D-Printed Personalized Shoe

See how designers and engineers at Materialise worked with adidas to create a unique 3D-printed running shoe midsole which can be tailored to the cushioning needs of an individual’s foot.

Customer Stories

Characterization of Sensorless Motor Control Technology Using VisSim

“A key benefit to using VisSim for this project is its code generation capability and how quickly and fast it works. The speed of how its drivers work and being able to interface directly with our ROM code was really the key enabler for me, and th...

Customer Stories

Optimized Design for 3D Printed Valve Block Sheds Weight, Size and Gains Improved Performance

Not every component or product is suitable
for 3D printing, depending on its size, form
and design as well as the quantity needed.
A valve block is very suitable for 3D printing
and has a high potential for improvement in
weight, performance, and design freedom
when additively manufactured.

Customer Stories

Composite Rotor Blade Analysis using Altair HyperWorks

As part of a senior design project – the design and analysis of a coaxial rotor craft –
Christopher Van Damme, at the time of the project senior undergraduate student within the
department of Engineering Mechanics at the University of Wisconsin-Madison, had to analyze
a composite made helicopter

Customer Stories
545 Results